Operating Instruction

EDGE FCR 3 Operating Instruction

Page 24 of 64 Release Rev. C, 2019-09-10

3.2 Device Support by Standings

3.2.1 Mounting the Standings

There are two standings required to place the EDGE FCR 3 on a vertical or horizontal surface.

The standings need to be clipped on the housing only and can be removed easily on demand.

7. Put the standing at the lower EDGE FCR 3 housing edge as shown in Figure 9.

Figure 9: Mounting the standing step 1

8. Push from below the standing against the EDGE FCR 3 housing until the mechanic

snaps in with a click-sound (Figure 10).

Figure 10: Mounting the standing step 2