Operating Instruction

EDGE FCR 3 Operating Instruction

Rev. C, 2019-09-10 Release Page 23 of 64

3 Installation

3.1 Delivery and Unpacking

The EDGE FCR 3 is delivered in a carton enclosure (Figure 8) which also includes the (optional)

accessories (e.g. standings, power supply). The device is already pre-assembled and

personalized, i.e. ready for use after powering.

Figure 8: EDGE FCR 3 packaging

IMPORTANT NOTICE

Please check packaging and delivery immediately after receipt regarding

damages and completeness. Do not throw away the packaging – it can

be used for storage or sending the device back to MYNXG in case of

service needed.

CAUTION

Devices on which moisture has developed because of temperature

changes must not be used unless they have been completely dried.

CAUTION

The EDGE FCR 3 and accessories shall not be used when damages or

technical defects are visible or recognized.