Operating Instruction

EDGE FCR 3 Operating Instruction
Page 20 of 64 Release Rev. C, 2019-09-10
© MYNXG Product GmbH, 2019. All rights reserved
2.7 EMC and ESD concept
The MYNXG EDGE FCR 3 is designed to be compliant with the EU and North America
regulations when installed per MYNXG EDGE FCR 3 instructions.
The following components are shielded by itself:
▪ The M.2 Modem is shielded, fully type approved and certified.
▪ The Half Mini PCIe WI-FI cards are shielded, fully type approved and certified.
▪ The Extension Cards are shielded and certified as part of the EDGE FCR 3 design.
▪ All Cards are in line with the EMC Immunity and EMC Emission.
Furthermore, the PCB board design is done per the following principles:
▪ On Board EMC and ESD protection components per interface.
▪ Connectors are selected in line with the consortiums (USB, Gigabit Ethernet, ProfiNet).
▪ All boards are in line with EMC Immunity Class B EN 61000-6-2.
▪ All boards are in line with Emission Class A EN 61000-6-3.
▪ All boards and all components are REACH and RoHS compliant with the respective EU
regulations.