Operating Instruction

EDGE FCR 3 Operating Instruction
Rev. C, 2019-09-10 Release Page 13 of 64
© MYNXG Product GmbH, 2019. All rights reserved
IMPORTANT NOTICE
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
1.9 Warranty
For details on the MYNXG warranty policy, please visit our website www.mynxg.com.
1.10 Disposal of EDGE FCR 3 – Save the Environment
The EDGE FCR 3 does not contain hazardous materials or need any special handling at the
end of its lifetime. Many components of the device can be recycled and should be disposed
with respect to the local regulations. Feel free to send the unit back to us after sending a
request (contact details given in the next chapter).
1.11 Behavior in Case of Malfunctions and Irregularities
The appliance may only be used in a flawless condition. If you notice irregularities,
malfunctions or damage, immediately take the appliance out of service and inform your
supervisor (if any).
The user / owner of the EDGE FCR 3 and associated accessories shall report all complaints
about the system to any representative of MYNXG Product GmbH or directly to:
MYNXG Technology GmbH
Neumeyerstrasse 28-34
DE-90411 Nürnberg
Germany
Phone: [phone]
E-Mail: [e-mail]