Owner`s manual

23
2/2
Unit Name
PROFILE 5
SD
BACK
BABE BLUE
SESSION 8
BORN TO BE
SESSION 7
DELETE
PLAY
RENAME
GOING TO KC
2/2
Unit Name
PROFILE 5
SD
LOOP
GOING TO KC
BABE BLUE
SESSION 8
BORN TO BE
SESSION 7
Mark 1
Mark 2
MORE
GOING TO KC
00:00:00
0:05:50
0:00:14
0:02:22
0:01:27
SD
2/2
Unit Name
PROFILE 5
BACK
GOING TO KC
BABE BLUE
SESSION 8
BORN TO BE
SESSION 7
Time: 0:00:50 Tracks: 16
PLAY
ALONG
STOP
MORE
GOING TO KC
00:00:00
0:05:50
0:01:27
Time: 0:05:35 Tracks: 12
Time: 0:04:36 Tracks: 12
Time: 0:05:50 Tracks: 10
Time: 0:00:50 Tracks: 16
Time: 0:00:55 Tracks: 16
Time: 0:05:35 Tracks: 12
Time: 0:04:36 Tracks: 12
Time: 0:00:55 Tracks: 16
Time: 0:04:36 Tracks: 12
Time: 0:00:50 Tracks: 16
Time: 0:00:55 Tracks: 16
Time: 0:05:35 Tracks: 12
Sessions- Playback and Play Along
To play a session select it with the scroll bar
and then press the softkey PLAY, or push the
encoder button [4]. You will see the playback
screen and the tracks from the session will
start playing. Press BACK twice to get to the
main mix screen to remix the session. All
transport functions(start, pause, forward,
rewind, stop) are only active when you are on
the session screen.
Press the encoder once to pause (icon with
two blue bars), press again to restart. Turning
the jog wheel moves forward or backwards. If
you select PLAY ALONG you include the two
local inputs of your myMix. If you have a
session with more than 14 tracks, track 15 and
16 will be replaced by the local inputs. Play
Along is a preference setting that will remain
on your myMix until changed.
The softkey MORE toggles to a menu that lets
you activate a loop function and two markers.
Press Mark 1 to set the start point, press Mark
2 for the end point of the loop. Holding it for 3
seconds clears it. The markers and the loop
are saved with each session on the SD card. If
not in Loop the markers have no function.
Press MORE again to get to the session
screen.
Sessios that were recorded with myMix or created using the myMix Wave software tool can also
be played back and remixed. The individual tracks, named as the channels during the recording
are played through the mixer for a remix on the fly, including all functions of the mixer. Ideal for
rehearsal, half playbacks, or just to have quick access to the performance of the last concert. To
access the Session screen, go to SETTINGS-Sessions.
Note: When a session is playing, the settings of the mixer are all saved in the current profile.
Thus a session played back immediately after recording will sound like the live mix. A session
that has never been played in a profile starts in „zero mix“. Once changes to the mix are made
they get automatically saved in the profile like any change in a live mix.