Owner`s manual

19
SETTINGS
Here you will find everything not directly involved with mixing: input configuration, naming of your
device, send mix to network, channel selection, playback of recorded sessions, master equalizer
and many more.
Profiles
A profile stores all of the settings related to a mix and is automatically updated the moment you
make a change. This includes channel selection, input mode, input naming, volume, tone, mute,
solo, pan, effect settings and master EQ. Profiles allow you to use your myMix in a variety of
situations with different inputs, outputs and settings, eliminating the need to constantly
reconfigure your unit. Especially when you use myMix in different scenarios - with different input
sources and in-ear as well as monitor speakers we highly recommend to use dedicated profiles.
In the PROFILE screen, you can manage up to 20 different profiles. By default, there is one
profile in which all changes are saved. To create a new profile press NEW. You are now
automatically in the new profile, while the settings are a 100% copy of the last settings you used.
All changes you apply from now on will be saved in that new profile. . To select a profile, scroll to
highlight and push the jog wheel. The currently selected profile name is displayed on the status
bar.
The profile saves the data for a network channel by name (and MAC address of the unit
streaming). So if you change the name of a input it shows as a different channel on the network
(while physically still the same input).