Owner`s manual

16
MAIN SCREEN
The main screen shows you all the selected channels in the network that will contribute to your
mix. The level indicator bar next to each channel name serves as a relative indicator towards the
volume of each channel. Use the encoder [4] to scroll through the screen to select a channel.
Master Volume
To adjust the levels of all channels simultaneously, while retaining the proportions of your mix,
push the soft key MASTER VOLUME. All channels will be selected and can be adjusted with the
jog wheel. If a channel hits the upper or the lower limit of the volume range (0% to 100%) it will
simply stop moving and all other channels will continue to adjust. If you bring a channel back
from the upper or lower limit, the proportions remain the same.
To exit the MASTER VOLUME mode, push
the soft key labeled BACK. ZERO MIX
returns the settings for all channels to the
default position = 0%.
Push the soft key labeled BACK to return to
the main screen.
Solo
To SOLO a channel, scroll to the channel so it is highlighted and push the soft key labeled
SOLO. In SOLO mode, only channels with the SOLO function activated are audible. Multiple
channels can be in SOLO mode simultaneously.
A yellow SOLO indicator will appear on the
channels that are in SOLO mode.
Additionally, a SOLO indicator will appear in
the status bar. Push the SOLO soft key again
to clear the channel SOLO. Pushing and
holding the SOLO button for more than three
seconds clears SOLO for all channels.
BACK