Owner`s manual

BOOTING UP

As soon as myMix receives power, it will boot up with the myMix logo splash screen. Once boot

up is complete, the main screen appears which displays your local inputs (if selected, see

SETTING-Inputs) as well as the signals from other myMix units and input expanders. myMix

devices with input signals are detected automatically. From all signals you can select a

maximum of 16 audio channels. See chapter SETTING-Remote Channel Select for details.

Default Main Screen with no other units, showing the

two local input channels.

Main screen displaying other units on the network

and their input channel names.

Note: when you use myMix for the first time the unit boots up in factory default mode: Volume is

0%, Tone is neutral, Effect send 0%, Pan center. The same applies to every unit that is detected

for the first time.

NAVIGATING MYMIX

myMix is designed for straightforward and intuitive navigation. The main navigation tools are

the jog wheel and the four soft keys on the right side of the unit. Rotate the jog wheel to highlight

channels, adjust parameters, and scroll through setting options and the alphabet. Push the jog

wheel [4] to show the channel screen, parameter setting, move to the next letter, or to go back.

For instance, to adjust the volume of a channel, simply rotate the jog wheel to highlight the

channel, push the jog wheel to bring up the channel screen, and rotate the jog wheel to adjust

the volume up or down. Push the jog wheel again to go back to the main screen, or simply allow

the screen to time out [also see SETTINGS → Preferences, Activity Timeout].

The four soft keys on the right side of the unit change functions depending on the screen that is

currently displayed. Their purpose is always listed on the screen directly to the left of the button.

2/2

6/12