Owner`s manual

7
Ch1
Ch2
Ch3
Ch4
Ch5
Ch6
Ch7
Ch8
Hot
24
10
21
7
18
4
15
1
Cold
12
23
9
20
6
17
3
14
Grd
25
11
22
8
19
5
16
2
INSTALLATION
1- Input Signal LEDs Channel 1-8
2- Input Signals LEDs Channel 9-16
3 -Configuration Port
4- Network Port
5- Connector for External Power Supply
6- Connector for Analog Input Signals Channel 9-16
7*- Input Selector Switch Channels 9-16
þIEX-16L unit
þPower supply for IEX-16L with power plug
þOwner's manual with warranty information
CONNECTIONS
Audio Inputs
The IEX-16L has 16 analogue balanced line level inputs. They are grouped in
blocks of eight channels on two DB25 female connectors [6 & 13]. The DB25
connectors use industry standard pin out for readily available audio snakes with
XLR or TRS connectors. The version IEX16L-A is equipped with additional digital
®
inputs in ADAT format , 24-bit, 48kHz [9 & 10]. The input selector switches[7 & 12]
toggle between analog or digital inputs for channels 1-8 and 9-16. The status
LEDs [8 & 1] indicate the respective digital input.
Network and Configuration Port
Power Supply
Both ports are 100BASE-TX. While the network port [3] is used for the normal connection of the IEX-16L to the switch, the
configuration port [4] is used to directly connect a myMix unit for the configuration of the IEX-16L. The configuration port
does not carry any audio signals but has the lock capability.
[5] is the connection for the external power supply, 24V, 0.5A DC. The IEX-16L uses the same power supply that is shipped
with myMix units. The IEX-16L doesn't have a power switch, so if you are not using it for an extended period of time it is
recommended that you power the unit down by unplugging the power supply from the mains.
Pin Out DB25
24V 0.5A
1
2
3 4
Front Panel
Rear Panel
5
6 7* 8* 9* 10* 11* 12* 13
8* - LED for Digital Input Channels 9-16
9* - Optical Signal Input (ADAT Format) Channels 9-16
10* - Optical Signal Input (ADAT Format) Channels 1-8
11* - LED for Digital Input Channels 1-8
12* - Input Selector Switch Channels 1-8
13* - Connector for Analog Input Signals Channels 1-8
* only available on version IEX16L-A.
The IEX-16L should be mounted in a 19" rack of suitable construction for its intended purpose. The four holes in the
front panel of the IEX-16L support the full weight of the unit. Avoid to mount the IEX-16L next to devices that create
excessive heat or strong radiating fields such as power amplifiers. Ensure that the IEX-16L has sufficient cooling.
When you unpack the IEX16L you should find the following items in the box:
If any of these items are missing, contact your myMix dealer.