Owner`s manual

10
...
Optical Cable - TOSLINK
The version IEX16L-A has in addition to the 2x 8 line
®
level inputs 2 digital inputs in ADAT format (24-bit, 48
kHz). This allows to get digital inputs from a digital
console or a sound card directly into the myMix system.
®
The ADAT input card of the IEX16L-A has a sample rate
converter. The clock for the myMix system is done
internally within myMix, so no master clock needs to be
supplied.
®
Each ADAT input is capable of 8 channels in 24-bit,
48kHz. As the inputs are switched in groups of 8, it is also
possible to combine 8 analogue and 8 digital signals. The
configuration and the operation of the signals is identical
to any other signal within myMix.
...
Optical Cable - TOSLINK
4 IEX-16L-A
Network Switch
with GB Uplink
MADI
MADI to ADAT
Interface 8 x 8
ADAT In/Out
®
Using third party MADI to ADAT interface allows to feed
up to 64 audio channels in 24-bit, 48kHz quality to the
myMix system with a single cable.
®
The MADI to ADAT interface provides up to 8 signal
groups of 8 channels each. One IEX16L-A can take two
8ch groups, so for the total of 64 channels, 4 IEX16L-A
are used. A managed switch with a GB uplink (Cat6
cabling) is connected to another managed switch that
distributes the signal to the myMix units.
IEX-16L-A
Network Switch
INTEGRATING INTO EXISTING SOUND SYSTEMS-Digital Inputs IEX16L-A
Digital Input using a MADI to Interface
®
ADAT
®
ADAT Optical Output (8 channels) from digital console or soundcard
Digital Input from outputs of a mixing console or sound card
®
ADAT