User`s guide
Light Timer Option
If LITE TIMR does not appear in the Main Menu, the Light Timer
feature is not enabled by the manufacturer.
When available, the Light Timer is OFF by default.
Light Timer Programming
While the Temperature is
still ashing, press Light
repeatedly until LITE TIMR
appears in the LCD.
SET
RANGE
Main Screen
READY
RANGE
FLTR1
Sets Timer Length in hours
Sets start hour Selects minutes
Selects part of an hour
SET
A
SET
A
SET
A
Sets 15-minute increments
SET
A
SET
SET
SET
Shows/ashes start time
to show RUN HRS
to show TIMR ENDS xx:xx
Sets 15-minute increments
A
To next item in
Main Menu
Main Screen
READY
RANGE
FLTR1
Main Screen
READY
RANGE
FLTR1
SET
SET
To Set
To Set
To Set
Waiting
Several Seconds
Reverts to Original Setting
*****
Waiting
Several Seconds
Reverts to Original Setting
*****
Wait to
Revert
*****
To Set
Waiting several seconds
will lose any new Lite Timer
On/OFF, Start Time and Run Hours and
revert to the previous Lite Timer settings.
*****
Indicates Flashing or Changing Segment
Key
A temperature button, used for “Action”
Light or dedicated “Choose” button, depending on control panel conguration
Indicates Alternating or Progressive Message - every 1/2 second
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original setting and
ignores any change to that menu item.
*****
Indicates a Menu Item that
Depends on a Manufacturer
Conguration and
may or may not appear.
Light Timer Option
If LITE TIMR does not appear in the Main Menu, the Light Timer
feature is not enabled by the manufacturer.
When available, the Light Timer is OFF by default.
Light Timer Programming
While the Temperature is
still ashing, press Light
repeatedly until LITE TIMR
appears in the LCD.
SET
RANGE
Main Screen
READY
RANGE
FLTR1
Sets Timer Length in hours
Sets start hour Selects minutes
Selects part of an hour
SET
A
SET
A
SET
A
Sets 15-minute increments
SET
A
SET
SET
SET
Shows/ashes start time
to show RUN HRS
to show TIMR ENDS xx:xx
Sets 15-minute increments
A
To next item in
Main Menu
Main Screen
READY
RANGE
FLTR1
Main Screen
READY
RANGE
FLTR1
SET
SET
To Set
To Set
To Set
Waiting
Several Seconds
Reverts to Original Setting
*****
Waiting
Several Seconds
Reverts to Original Setting
*****
Wait to
Revert
*****
To Set
Waiting several seconds
will lose any new Lite Timer
On/OFF, Start Time and Run Hours and
revert to the previous Lite Timer settings.
*****
Indicates Flashing or Changing Segment
Key
A temperature button, used for “Action”
Light or dedicated “Choose” button, depending on control panel conguration
Indicates Alternating or Progressive Message - every 1/2 second
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original setting and
ignores any change to that menu item.
*****
Indicates a Me
nu Item that
Depends on a
Manufacturer
Congurati
on and
may or may n
ot appear.
Adjusting the Set Temperature
When using a panel with Up and Down buttons (Temperature buttons), pressing Up or Down will cause the temperature to
flash. Pressing a temperature button again will adjust the set temperature in the direction indicated on the button. When
the LCD stops flashing, the spa will heat to the new set temperature when required.
If the panel has a single temperature button, pressing the button will cause the temperature to flash. Pressing the button
again will cause the temperature to change in one direction (e.g. UP). After allowing the display to stop flashing, pressing
the Temperature Button will cause the temperature to flash and the next press will change the temperature in the opposite
direction (e.g. DOWN).
Press-and-Hold
If a Temperature button is pressed and held when the temperature is flashing, the temperature will continue to change
until the button is released. If only one temperature button is available and the limit of the Temperature Range is reached
when the button is being held, the progression will reverse direction.
Dual Temperature Ranges
This system incorporates two temperature range settings with independent set temperatures. The High Range designated in
the display by an “up” arrow, and the Low Range designated in the display by a “down” arrow.
These ranges can be used for various reasons, with a common use being a “ready to use” setting vs. a “vacation” setting.
The Ranges ar
e chosen using the menu structure below. Each range maintains its own set temperature as programmed by
the user. This way, when a range is chosen, the spa will heat to the set temperature associated with that range.
For example:
High Range might be set between 80°F and 104°F.
Low Range might be set between 50°F and 99°F.
More specific Temp Ranges may be determined by
the Manufacturer.
Freeze Protection is active in either range.
See Ready and Rest on Page 6
for additional heating control information.
Temperature and Temp Range
High-Range vs.
Low-Range Temp Choice
Press a Temp Button repeatedly to change the temperature.
Pressing and holding a Temp Button will also change the temperature.
Pressing and holding a Temp Button will also change the temperature.
Toggle the Range arrows in the LCD.
SET
RANGE
SET
RANGE
Set Temp will Show & Flash
Set Temp will Show & Flash
SET
RANGE
FLTR
1
SET
RANGE
FLTR
1
SET
RANGE
FLTR1
SET
RANGE
SET
RANGE
Waiting
Several Seconds
Reverts to Original Setting
To Set
*****
SET
RANGE
While
temperature
is ashing...
To next item in Main Menu
Main Screen
READY
RANGE
FLTR1
Main Screen
READY
RANGE
FLTR1
Several Seconds
OR
Main Screen
READY
RANGE
FLTR1
Press a Temp Button repeatedly to change the temperature.
Several Seconds
OR
Main Screen
READY
RANGE
FLTR1
Main Screen
READY
RANGE
FLTR
1
Indicates Flashing or Changing Segment
Key
A temperature button, used for “Action”
Light or dedicated “Choose” button, depending on control panel
conguration
Indicates Alternating or Progressive Message - every 1/2 second
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original
setting and
ignores any change to that menu item.
*****