User`s guide
Adjusting Filtration
Sets Filter 1 length in hours
Sets start hour Selects minutes
Selects part of an hour
SET
FLTR1 P
SET
FLTR1 P
SET
FLTR1 P
Sets 15-minute increments
SET
FLTR1 P
FLTR
1
FLTR1
SET
FLTR1
SET
FLTR1
SET
FLTR1
Shows/ashes start time
FLTR1
to show RUN HRS
to show F1 ENDS xx:xx
Sets 15-minute increments
A
1
While the Temperature is
still ashing, press Light
repeatedly until FLTR 1
appears in the LCD.
SET
RANGE
Main Screen
READY
RANGE
FLTR1
Main Screen
READY
RANGE
FLTR1
Sets Filter 1 length in hours
Sets start hour Selects minutes
Selects part of an hour
SET
FLTR
2 P
SET
FLTR
2 P
SET
FLTR
2 P
Sets 15-minute increments
SET
FLTR
2 P
FLTR
2
FLTR
2
SET
FLTR
2
SET
FLTR
2
SET
FLTR
2
Shows/ashes start time
FLTR
2
to show RUN HRS
to show F1 ENDS xx:xx
Sets 15-minute increments
A
Main Screen
READY
RANGE
FLTR1
2
To next item in
Main Menu
Main Screen
READY
RANGE
FLTR1
SET
FLTR
2
SET
FLTR
2
To Set
To Set
To Set
To Set
To Set
Waiting
Several Seconds
Reverts to Original Setting
Waiting
Several Seconds
Reverts to Original Setting
Wait to
Revert
*****
Waiting
Several Seconds
Reverts to Original Setting
*****
Waiting several seconds
will lose any new Filter 1
Start Time and Run Hours and
revert to the previous Filter 1 settings.
*****
To Set
Waiting several seconds
will lose any new Filter 2 On/OFF,
Start Time and Run Hours and
revert to any previous Filter 2 settings.
*****
*****
Wait to
Revert
*****
*****
Main Filtration
Filter cycles are set using a start time and a duration. Start time is indicated by an “A” or “P” in the bottom right corner of
the display. Duration has no “A” or “P” indication. Each setting can be adjusted in 15-minute increments. The panel calcu-
lates the end time and displays it automatically.
Indicates Flashing or Changing Segment
Key
A temperature button, used for “Action”
Light or dedicated “Choose” button, depending on control panel conguration
Indicates Alternating or Progressive Message - every 1/2 second
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original setting and
ignores any change to that menu item.
*****
Filter Cycle 2 - Optional Filtration
Filter Cycle 2 is OFF by default.
It is possible to overlap Filter Cycle 1 and Filter Cycle 2, which will shorten
overall filtration by the overlap amount.
Purge Cycles
In order to maintain sanitary conditions, secondary Pumps and/or a Blower will
purge water from their respective plumbing by running briefly at the
beginning of each filter cycle.
If Filter Cycle 1 is set for 24 hours, enabling Filter Cycle 2 will initiate a purge
when Filter Cycle 2 is programmed to begin.
Adjusting Filtration
Sets Filter 1 length in hours
Sets start hour Selects minutes
Selects part of an hour
SET
FLTR1 P
SET
FLTR1 P
SET
FLTR1 P
Sets 15-minute increments
SET
FLTR1 P
FLTR
1
FLTR1
SET
FLTR1
SET
FLTR1
SET
FLTR1
Shows/ashes start time
FLTR1
to show RUN HRS
to show F1 ENDS xx:xx
Sets 15-minute increments
A
1
While the Temperature is
still ashing, press Light
repeatedly until FLTR 1
appears in the LCD.
SET
RANGE
Main Screen
READY
RANGE
FLTR1
Main Screen
READY
RANGE
FLTR1
Sets Filter 1 length in hours
Sets start hour Selects minutes
Selects part of an hour
SET
FLTR
2 P
SET
FLTR
2 P
SET
FLTR
2 P
Sets 15-minute increments
SET
FLTR
2 P
FLTR
2
FLTR
2
SET
FLTR
2
SET
FLTR
2
SET
FLTR
2
Shows/ashes start time
FLTR
2
to show RUN HRS
to show F1 ENDS xx:xx
Sets 15-minute increments
A
Main Screen
READY
RANGE
FLTR1
2
To next item in
Main Menu
Main Screen
READY
RANGE
FLTR1
SET
FLTR
2
SET
FLTR
2
To Set
To Set
To Set
To Set
To Set
Waiting
Several Seconds
Reverts to Original Setting
Waiting
Several Seconds
Reverts to Original Setting
Wait to
Revert
*****
Waiting
Several Seconds
Reverts to Original Setting
*****
Waiting several seconds
will lose any new Filter 1
Start Time and Run Hours and
revert to the previous Filter 1 settings.
*****
To Set
Waiting several seconds
will lose any new Filter 2 On/OFF,
Start Time and Run Hours and
revert to any previous Filter 2 settings.
*****
*****
Wait to
Revert
*****
*****
Main Filtration
Filter cycles are set using a start time and a duration. Start time is indicated by an “A” or “P” in the bottom right corner of
the display. Duration has no “A” or “P” indication. Each setting can be adjusted in 15-minute increments. The panel calcu-
lates the end time and displays it automatically.
Indicates Flashing or Changing Segment
Key
A temperature button, used for “Action”
Light or dedicated “Choose” button, depending on control panel conguration
Indicates Alternating or Progressive Message - every 1/2 second
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original setting and
ignores any change to that menu item.
*****
Filter Cycle 2 - Optional Filtration
Filter Cycle 2 is OFF by default.
It is possible to overlap Filter Cycle 1 and Filter Cycle 2, which will shorten
overall filtration by the overlap amount.
Purge Cycles
In order to maintain sanitary conditions, secondary Pumps and/or a Blower will
purge water from their respective plumbing by running briefly at the
beginning of each filter cycle.
If Filter Cycle 1 is set for 24 hours, enabling Filter Cycle 2 will initiate a purge
when Filter Cycle 2 is programmed to begin.
Adjusting Filtration
Sets Filter 1 length in hours
Sets start hour Selects minutes
Selects part of an hour
SET
FLTR1 P
SET
FLTR1 P
SET
FLTR1 P
Sets 15-minute increments
SET
FLTR1 P
FLTR
1
FLTR1
SET
FLTR1
SET
FLTR1
SET
FLTR1
Shows/ashes start time
FLTR1
to show RUN HRS
to show F1 ENDS xx:xx
Sets 15-minute increments
A
1
While the Temperature is
still ashing, press Light
repeatedly until FLTR 1
appears in the LCD.
SET
RANGE
Main Screen
READY
RANGE
FLTR1
Main Screen
READY
RANGE
FLTR1
Sets Filter 1 length in hours
Sets start hour Selects minutes
Selects part of an hour
SET
FLTR
2 P
SET
FLTR
2 P
SET
FLTR
2 P
Sets 15-minute increments
SET
FLTR
2 P
FLTR
2
FLTR
2
SET
FLTR
2
SET
FLTR
2
SET
FLTR
2
Shows/ashes start time
FLTR
2
to show RUN HRS
to show F1 ENDS xx:xx
Sets 15-minute increments
A
Main Screen
READY
RANGE
FLTR1
2
To next item in
Main Menu
Main Screen
READY
RANGE
FLTR1
SET
FLTR
2
SET
FLTR
2
To Set
To Set
To Set
To Set
To Set
Waiting
Several Seconds
Reverts to Original Setting
Waiting
Several Seconds
Reverts to Original Setting
Wait to
Revert
*****
Waiting
Several Seconds
Reverts to Original Setting
*****
Waiting several seconds
will lose any new Filter 1
Start Time and Run Hours and
revert to the previous Filter 1 settings.
*****
To Set
Waiting several seconds
will lose any new Filter 2 On/OFF,
Start Time and Run Hours and
revert to any previous Filter 2 settings.
*****
*****
Wait to
Revert
*****
*****
Main Filtration
Filter cycles are set using a start time and a duration. Start time is indicated by an “A” or “P” in the bottom right corner of
the display. Duration has no “A” or “P” indication. Each setting can be adjusted in 15-minute increments. The panel calcu-
lates the end time and displays it automatically.
Indicates Flashing or Changing Segment
Key
A temperature button, used for “Action”
Light or dedicated “Choose” button, depending on control panel congurati
on
Indicates Alternating or Progressive Message - every 1/2 second
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original setting and
ignores any change to that menu item.
*****
Filter Cycle 2 - Optional Filtration
Filter Cycle 2 is OFF by default.
It is possible to overlap Filter Cycle 1 and Filter Cycle 2, which will shorten
overall filtration by the overlap amount.
Purge Cycles
In order to maintain sanitary conditions, secondary Pumps and/or a Blower will
purge water from their respective plumbing by running briefly at the
beginning of each filter cycle.
If Filter Cycle 1 is set for 24 hours, enabling Filter Cycle 2 will initiate a purge
when Filter Cycle 2 is programmed to begin.
Adjusting the Set Temperature
When using a panel with Up and Down buttons (Temperature buttons), pressing Up or Down will cause the temperature to
flash. Pressing a temperature button again will adjust the set temperature in the direction indicated on the button. When
the LCD stops flashing, the spa will heat to the new set temperature when required.
If the panel has a single temperature button, pressing the button will cause the temperature to flash. Pressing the button
again will cause the temperature to change in one direction (e.g. UP). After allowing the display to stop flashing, pressing
the Temperature Button will cause the temperature to flash and the next press will change the temperature in the opposite
direction (e.g. DOWN).
Press-and-Hold
If a Temperature button is pressed and held when the temperature is flashing, the temperature will continue to change
until the button is released. If only one temperature button is available and the limit of the Temperature Range is reached
when the button is being held, the progression will reverse direction.
Dual Temperature Ranges
This system incorporates two temperature range settings with independent set temperatures. The High Range designated in
the display by an “up” arrow, and the Low Range designated in the display by a “down” arrow.
These ranges can be used for various reasons, with a common use being a “ready to use” setting vs. a “vacation” setting.
The Ranges ar
e chosen using the menu structure below. Each range maintains its own set temperature as programmed by
the user. This way, when a range is chosen, the spa will heat to the set temperature associated with that range.
For example:
High Range might be set between 80°F and 104°F.
Low Range might be set between 50°F and 99°F.
More specific Temp Ranges may be determined by
the Manufacturer.
Freeze Protection is active in either range.
See Ready and Rest on Page 6
for additional heating control information.
Temperature and Temp Range
High-Range vs.
Low-Range Temp Choice
Press a Temp Button repeatedly to change the temperature.
Pressing and holding a Temp Button will also change the temperature.
Pressing and holding a Temp Button will also change the temperature.
Toggle the Range arrows in the LCD.
SET
RANGE
SET
RANGE
Set Temp will Show & Flash
Set Temp will Show & Flash
SET
RANGE
FLTR
1
SET
RANGE
FLTR
1
SET
RANGE
FLTR1
SET
RANGE
SET
RANGE
Waiting
Several Seconds
Reverts to Original Setting
To Set
*****
SET
RANGE
While
temperature
is ashing...
To next item in Main Menu
Main Screen
READY
RANGE
FLTR1
Main Screen
READY
RANGE
FLTR1
Several Seconds
OR
Main Screen
READY
RANGE
FLTR1
Press a Temp Button repeatedly to change the temperature.
Several Seconds
OR
Main Screen
READY
RANGE
FLTR1
Main Screen
READY
RANGE
FLTR
1
Indicates Flashing or Changing Segment
Key
A temperature button, used for “Action”
Light or dedicated “Choose” button, depending on control panel
conguration
Indicates Alternating or Progressive Message - every 1/2 second
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original
setting and
ignores any change to that menu item.
*****