Installation guide

Using RAID EzAssist
4-6 eXtremeRAID Installation Guide
☛
Note
If the BIOS has been disabled on the controller, You
will need to press Alt–M to enable it (See your
controller’s Installation Guide for details).
3. Watch the messages on the screen for the following prompt to be
displayed:
Press <ALT-R> for RAID Configuration options
4. Press
Alt–R
to get into RAID EzAssist (the configuration utility).
☛
Note
For more detailed information on how to run RAID
EzAssist, refer to the RAID EzAssist Configuration
Utility User Reference Guide (P/N 775029), which is
included on the distribution CD-ROM.