Installation guide

Installation
775013 3-3
External SCSI Connectors
The external SCSI connectors on the controller are female, Very High
Density Cable Interconnect (VHDCI) connectors.
The cables should have the VHDCI offset connector at one end and a High
Density, 68-pin connector at the other end. Such cables with the correct
offset hood and connector assembly are required if cables are to be
connected to external channels 0 and 2 at one time.
Figure 3-2. DAC1164P Controller External Connectors
Figure 3-3. Offset Hood Cable Assembly Alignment
* Where
xx
is the cable length in meters.