Installation guide

Running RAID Assist
4-42 GAM Client v3.00 and WSAM User’s Manual
Assisted Configuration
Assisted Configuration provides three options:
• New Configuration. Sets up a new configuration on the controller,
deleting the previous configuration and data (if any).
• Add Logical Drive. Sets up additional arrays (logical drives) leaving
the existing array(s) intact. At least one array must be configured on
this controller, and unconfigured drive space must remain.
• Expand Array. Restripes data in your array across additional,
unconfigured drives to expand the capacity of the array.
Open New Configuration (for example), as shown in Figure 4-36:
Figure 4-36. Select “New Configuration”