Installation guide

Configuration
Manual No. 771961 4-35
Figure 4-30. Physical Device Options Dialog Box
The Physical Device Options dialog box (Figure 4-30 ) displays and allows
you to change certain physical device transfer options. A list of physical
devices connected to the currently-selected controller is displayed with the
following information about each device:
• Model number of the physical device (often includes drive size)
• Channel number and Target ID where this device resides on the
controller
• The current Transfer Speed (in MHz) for the device
• The Transfer Width (8 bits or 16 bits) for the device
• The Tag Value
You may change the Transfer Speed, Transfer Width, and/or Tag Value for a
single or for multiple physical device(s) as follows:
1. Select the physical device(s) in the window by clicking under “Model.”
Current settings are displayed under “Setting Options.”
2. Change the Transfer Speed and/or Transfer Width, if desired, by
selecting an available option in the drop down list box.
3. Change the Tag Value, if desired, by typing a new value in the Tag
Value field.
If you selected multiple devices together, all selected devices will be
changed to the values you’ve specified.