Installation guide

Configuration
Manual No. 771961 4-31
• CC For Invalid LUN. Disables the check condition, affecting the
handling of the Inquiry command when the referenced LUN is
invalid.
• Set the Host Bus Reset Delay. Allows the controller to reset the host in
failover and failback situations. When Disabled - no SCSI bus reset is
generated on the host; 1 - 14 - generates reset this many seconds after
the failover or failback occurs; Immediate - generates immediate reset
with no delay. This is host SCSI only.
• Set Debug Port Usage. Select SLP/VT100 emulation or Debug mode.
• Set Debug Port Speed. Sets the baud rate for the serial port from 2400
to 19200 baud.