Installation guide

Configuration
Manual No. 771961 4-19
In the Settings dialog box, under the Event Editor tab (Figure 4-20), you
have the option to do any of the following:
Event ID / User Event ID/ Severity / Default
• Select an Event ID to edit from the Event ID list box.
• Enter your own number for this event in the User Event ID list box, or
keep the default (equal to the Event ID number).
• Enter your own event severity level in the Severity list box, or keep the
default (set by Mylex).
• Click the Default button to return all settings for this particular event to
their Mylex defaults.
Alarm for the Event
• When all Global boxes are checked, you are seeing the alarms that will
activate when this particular event occurs (these are based on the
settings in Alert Preferences). Check or uncheck specific boxes if you
wish to override these defaults and change the alarms for this event.
Event Message Text
• Enter new text for this event, or keep the default text (set by Mylex).
Default All
• Click the Default All button to reset all events of all severity levels back
to their Mylex defaults.
Finish by doing one of the following:
• Click OK to accept the event settings and exit the Settings dialog box,
or
Click Cancel to leave original settings unchanged, or
Click another Settings tab to set additional user preferences.