Installation guide

Configuration
Manual No. 771961 4-5
2. In the Adding Item dialog box, enter a name for the server group that
you are adding.
3. Click OK. The Define Server Groups dialog box will reappear with the
newly-defined server group added.
Adding a Server to the Server Groups List
With the Define Server Groups dialog box open (Figure 4-4), do the
following:
1. Click the Add button under the Servers section of the dialog box.
2. In the Adding Item dialog box, enter the IP address of the server that
you are adding. If you’re running GAM Client under Windows 2000 or
Windows NT, you may instead enter the name of the server.
3. Click OK. The Define Server Groups dialog box will reappear with the
newly-defined server added.
4. To add more servers to the group, repeat steps 1 through 3.
5. Click OK in the Define Server Groups dialog box when you are
finished.
After adding servers, Global Array Manager returns to the Global Status
window.
☛ Note
Select “All Servers” to see all servers in the Global
Status view.