Installation guide

Startup & Navigation
Manual No. 771961 3-13
• Scan Devices: Scans for new devices that have recently been added and
which are not currently identified within GAM Client or WSAM.
• Locate Array: Displays a list of available arrays and their associated
logical drives. The user selects an array to “locate” and all LEDs on all
physical devices associated with that array will blink to reveal the
location of the array.
• Advanced Functions: Opens a submenu (Figure 3-7) from which you
can select the following options:
• Performance Analysis: (PCI Controllers Only) Allows detailed
analysis of disk-level performance along several parameters.
• Flash Utility: Provides the ability to upgrade controller firmware,
BIOS, boot block, or BIOS configuration utility as new maintenance
releases become available.
• Shutdown: (External Controllers Only) Enables clean shutdown of
the controller system, leaving the battery charged.
Figure 3-7. Advanced Functions Submenu
• Settings: Opens a tabbed dialog box in which you can specify the
Alert/Alarm, Communication, and Event Editor settings that you
desire. Examples of such settings include type of alarm, such as pager,
fax, email, etc., modem baud rate, COM port, stop bits, data bits, parity,
event severity level, event message editing, and so on.
Window Menu
Figure 3-8. Window Menu