Installation guide

Navigating Global Array Manager Client or Workstation Array Manager
3-2 GAM Client v3.00 and WSAM User’s Manual
• Start the GAM Client software (Start->Programs->Mylex Global
Array Manager Client). If at least one server group and file server are
defined, the opening screen appears. If not, the Define Server Groups
dialog box appears (see “Setting Up Server Groups and Servers” on
page 4-4).
☛ Note
After starting the Global Array Manager Client,
minimize the utility and let it run in the background at
all times, unless you’re doing a configuration or
setting up a maintenance process. If Global Array
Manager detects a logical drive in a critical state, or a
physical drive failing, it prompts you with windows
describing the location and nature of the problem.
Maximize the utility to display more detailed
information.
In order for event notification to occur the Global
Array Manager Server and Client must be running at
all times.
Workstation Array Manager Component
Under Windows 2000 or Windows NT 4.0, you are ready to start up the
Workstation Array Manager once you have installed this component on your
workstation (see the previous chapter).
• Start the WSAM software (Start->Programs->Mylex Workstation
Array Manager).
Navigating Global Array Manager Client or
Workstation Array Manager
Button Controls
Dialog boxes throughout the Global Array Manager Client and Workstation
Array Manager have a series of control buttons. Some examples of these
include: