Installation guide

Manual No. 771961 3-1
Chapter 3
Startup & Navigation
Starting Global Array Manager or Workstation
Array Manager
Server Component
☛ Note
Installation and startup of the Global Array Manager
Server component is covered in the Disk Array
Controller Software Kit Installation Guide and User
Manual, Mylex Part Number: 771929. The software
for GAM Server is provided on the installation CD-
ROM.
Refer to the appropriate sections in the above-mentioned manual for
instructions on starting the Global Array Manager Server component under
any of the supported network operating systems.
Client Component
☛ Note
Install and start the GAM Server component before
you attempt to run the GAM Client component.
Under Windows 2000, Windows NT 4.0 or Windows 95/98, you are ready to
start up the Global Array Manager Client once you have installed the client
on your workstation (see the previous chapter).