Installation guide

Installation
Manual No. 771961 2-5
6. Click Next to continue with the installation once you’ve selected your
component(s).
If you selected both Global Array Manager Client and Workstation
Array Manager, you will see the following message (Figure 2-5):
Figure 2-5. Error - Must Choose GAM Client or WSAM
• If this message appears, click OK, then deselect either Global Array
Manager Client or Workstation Array Manager and click Next.
If you are attempting to install Workstation Array Manager under
Windows 95 or Windows 98, you will see a message of the following
type (Figure 2-6):
Figure 2-6. Error - WSAM Must Be Installed Under Windows NT or 2000
• If this message appears, click OK, then deselect Workstation Array
Manager and click Next.