Installation guide

Using the Flash Utility
6-8 GAM Client v3.00 and WSAM User’s Manual
Figure 6-6. Additional Flash File Information
4. Compare the information for the new .IMG with the current
information to confirm that a flash is warranted (for example, that the
.IMG contains a newer version of code)
5. Click Start Flash.
Because flashing new code to the controller erases what was there
previously, two levels of confirmation are required to proceed with the flash.
6. Click OK at the first confirmation message.
7. Type YES, then click OK at the second confirmation message.
The controller will be updated with the new code contained in the .IMG
file.