Installation guide

Battery Backup Unit Monitoring and Maintenance
5-52 GAM Client v3.00 and WSAM User’s Manual
Older Mylex PCI RAID Controller BBUs can only be monitored through
GAM Client or WSAM. BBUs cannot be reconditioned or recharged. The
only user interactive setting is low power threshold.
The following information is displayed in the dialog box:
• A gauge and text showing the current battery power remaining (in
hours), as well as a maximum value
• A gauge and text showing the current charge level (in percentage
points)
• The low power threshold for the battery (in hours). When battery power
sinks below this threshold, an alarm or message will alert the user to a
low battery power state.
Click OK if you changed the threshold value. This will accept the change,
OR
Click Cancel to close the Intelligent Battery Backup Unit window without
saving any changes.