Installation guide

Monitoring
Manual No. 771961 5-49
Consistency Check Status
If a consistency check process is currently underway, open the Consistency
Check Status box as shown in Figure 5-48 to monitor the progress of or
cancel the process:
Figure 5-48. Select “Consistency Check Status”
Figure 5-49. Consistency Check Status Box
The Consistency Check Status box (Figure 5-49) displays the progress of a
logical drive consistency check.
Click Cancel to stop the consistency check. You may need to check the
Views menu to see if Consistency Check Status is still enabled. If so, you
may need to cancel other consistency checks as well.
Click Close to close the Consistency Check Status box at any time.