Installation guide

Controller Monitoring
5-10 GAM Client v3.00 and WSAM User’s Manual
Figure 5-9. LUNs on Target 0, a Multiple LUN Device
Four LUNs are available in the example above (LUN 0 through LUN 3).
☛ Note
In order to configure devices on an External RAID
Controller, you must select the RAID controller
directly in the controller selection box, then run RAID
Assist. SCSI HBA and Target ID views only allow
you to see what’s connected to the External RAID
Controller. For additional details about the devices/
LUNs, you must also access the RAID controller
directly.