Installation guide

Monitoring
Manual No. 771961 5-9
SCSI Host Bus Adapters
Figure 5-8. SCSI HBA Controller View With Multiple LUN Device
Figure 5-8 above shows the Controller View for a typical SCSI Host Bus
Adapter. The special icon appearing on Channel 0, Target ID 0 indicates that
a multiple LUN device is present at that location. Supported multiple LUN
devices in GAM are External RAID Controllers, such as a Mylex
DAC960SX.
Viewing the configuration from the SCSI HBA’s point of view in this way,
you can actually see the logical units connected to the External RAID
Controller by double-clicking the special controller icon. When you do, a
Target ID View emerges showing basic information about the LUNs
configured on that External RAID controller (Figure 5-9):