Installation guide

Controller Monitoring
5-8 GAM Client v3.00 and WSAM Users Manual
Fibre-to-Fibre RAID Controllers
Figure 5-7. Controller View Window - Fibre-to-Fibre RAID Controller
The Controller View window (Figure 5-7), displays the following
information about the controller currently selected in the controller selection
box:
The number of channels on this controller, each channel depicted as a
tower
The physical devices present on each channel, specifying the target ID,
capacity of the device, device type, and device status
The logical drives configured on the controller, specifying the logical
drive number, capacity of the logical drive, configured RAID level, and
logical drive status
An Enclosure button which is used to monitor SES/SAF-TE data
pertinent to the Fibre Channel RAID Controller enclosure. See
Enclosure Monitoring and Management on page 5-23 for more
details.