Installation guide

Controller Monitoring
5-6 GAM Client v3.00 and WSAM User’s Manual
All RAID Controllers Except eXtremeRAID 3000 and
External Fibre-to-Fibre
Figure 5-5. Controller View Window - “Non-Fibre” RAID Controller
The Controller View window (Figure 5-5), displays the following
information about the controller currently selected in the controller selection
box:
• The number of channels on this controller, each channel depicted as a
tower
• The physical devices present on each channel, specifying the target ID,
capacity of the device, device type, and device status
• The logical drives configured on the controller, specifying the logical
drive number, capacity of the logical drive, configured RAID level, and
logical drive status
☛ Note
Dual active controllers (External RAID Controller
operation) will show at target ID 6 AND 7 in each
channel column. This only appears if the selected
controller is operating in duplex.