Installation guide

Running RAID Assist
4-50 GAM Client v3.00 and WSAM User’s Manual
Figure 4-44. WARNING Before Applying the Configuration
4. Type YES and click OK if you are sure you want to apply the new
configuration and overwrite the old. If you’re not sure, click Cancel.
☛ Note
In Assisted Configuration, Add Logical Drive and
Expand Array function very similarly to the New
Configuration option. In each case RAID Assist leads
you step-by-step through the relevant questions for
the task.
Manual Configuration
Manual Configuration provides four options:
• Edit Configuration. Displays the current configuration (disk arrays
and logical drives), and allows you to make any changes that you
require.
• New Configuration. Sets up a new configuration on the controller,
deleting the previous configuration and data (if any).
• Add Logical Drive. Sets up additional arrays (logical drives) leaving
the existing array(s) intact. At least one array must be configured on
this controller, and unconfigured drive space must remain.
• Expand Array. Restripes data in your array across additional,
unconfigured drives to expand the capacity of the array.