Installation guide

Controller Start-up
Manual Number 775012 4-3
Other BIOS Options
In addition to Configure MDAC, the other available BIOS options are:
• BIOS disabled / enabled
• CD-ROM boot disabled / disabled
• 2GB / 8GB drive geometry
BIOS Disable or Enable
This option must be enabled in order to change the following BIOS options.
When BIOS Disable or Enable is selected, the following message will be
displayed. Pressing any key will restart the system.
CD-ROM Boot Disable or Enable
The default for this option is for the CD-ROM boot to be disabled (e.g., the
system will boot from a hard drive. If a bootable CD is installed in the CD-
ROM drive, the system can boot from the CD if this option is enabled.
If the CD-ROM boot option is enabled, the CD-ROM will take priority over
the disk drives. For example, under MS-DOS, the disk drive that is normally
Drive C will become Drive D. All subsequent drive IDs will similarly be
moved down.