Installation guide

Standard Package Contents
1-2 DAC960PG/PJ Installation Guide
Controller Features and Functions
Features of the DAC960PG and DAC960PJ controllers include:
• Ultra SCSI drive channels that support RAID levels 0, 1, 3, 5, 0+1, 10,
30, and 50
• Single-Ended Wide Ultra SCSI (Fast 20) drive support
• High performance RISC processor and EDO ECC DRAM cache (4MB
to 128MB) for high speed, fault tolerant I/O transfers
• 512KB, 8-bit flash EEPROM for BIOS and code supports future
enhancements through firmware upgrades
• Built-in configuration utilities in BIOS (with firmware 4.06 and above)
• An Intelligent Battery Backup (IBBU) option to protect data in cache
during power loss is available for full-length card models
Operating System Support
• Microsoft Windows NT 3.51 and NT 4.0
• Novell NetWare 3.12 or 4.xx
• SCO UNIX 3.2.4, ODT, and OSR 5.0
• SCO UnixWare v2.1
• MS-DOS 5.x, 6.x, and above
• Microsoft Windows NT or Windows 95 – for Global Array Manager
(GAM) client only
Standard Package Contents
The following items are suppled with the standard shipping package:
Hardware
• DAC960PG or DAC960PJ Disk Array Controller with documentation
• Intelligent Battery Backup (IBBU) port loopback terminator plug (on
full-length cards only), or...
• Optional Intelligent Battery Backup Unit (IBBU)