Installation guide

About This Manual
This installation guide covers hardware set-up and configuration procedures
necessary for the installation of a DAC960PG PCI to Ultra-SCSI Raid
controller.
Chapter 1 is an introduction to the DAC960PG, providing an overview of
what the product is, operating system platforms that are supported, and the
prerequisites for product installation.
Chapter 2 is a functional description of the DAC960PG. This section also
provides detailed configuration information, and discusses options.
Chapter 3 explains installation procedures in detail, and includes an
installation checklist.
Chapter 4 gives information regarding firmware, BIOS start-sequences,
BIOS set-up options, and error messages.
Appendix A discusses enclosure management capability.
Appendix B (not included in the Beta version of this document) Describes
the Intelligent Battery Backup Unit (IBBU) and provides information on
how to install it.
The glossary defines the RAID terminology used in this manual.