Installation guide

Start-up Sequences
Manual No. 771971 4-3
Figure 4-1. BIOS options Menu
Use the up and down arrow keys to highlight the BIOS options to be toggled.
While a desired option is highlighted, press the
Enter
key to toggle the
option.
Note
If the BIOS is disabled, it will not be possible to
change the other options.
If the boot drive is on a DAC960PG, then drive geometry changes should not
be attempted unless the boot drive is going to be reformatted. The option to
change the disk drive geometry between 8 gigabytes and 2 gigabytes stops
and generates a warning about the potential of data loss before the change
proceeds.