Installation guide

Manual No. 771971 3-1
Chapter 3
Installation
Installation Overview
This chapter describes the installation of the DAC960PG PCI to Ultra-SCSI
RAID controller hardware and the proper connection and configuration of its
attached SCSI devices
Requirements
The following items are required to perform the installation:
• DAC960PG PCI to Ultra-SCSI RAID controller with memory
installed
• Host system with an available PCI slot
• Configuration & Utilities diskette containing the DACCF utility
• SCSI cable(s) to interconnect the controller and the drives/devices
• Narrow or Wide; and Standard, Fast, or Ultra-SCSI compliant disk
drives
• SCSI termination device(s) as required
Refer to the Configuration & Utilities diskette file DISKLIST.TXT for a list
of disk drives and other devices that are compatible with the DAC960PG.
Optional Requirements
The following optional items also may be required, depending on your
application or the type of installation:
• SCSI cable to interconnect the controller and external devices
• Battery back-up option for controller cache memory