Installation guide

Adapter and Device Configuration
Manual No. 3000863 3-11
• Scan SCSI Bus causes AutoSCSI to perform a SCSI inquiry scan of
the bus. When the scan completes, the device configuration window
displays the name of the device found at each SCSI ID.
• View SCSI Device Handshake displays the host adapter’s
handshake protocol to each device on the bus. The protocol can be
changed in the SCSI device View/Modify Configuration window.
Figure 3-9. SCSI Device Window
The initial device window shows all the devices as unscanned. Select
View SCSI Device Handshake before the devices are scanned to see a
window like that shown in Figure 3-10.