Technical information

How Do I Unassign Existing Spare Drives?
2-52 RAID EzAssist User’s Manual
Figure 2-53. Designate Drive as Unused Confirmation
☞ To apply the configuration, use the arrow key to select Yes,
then press Enter,
OR
☞ To cancel the configuration change, press Enter with No
selected.
When you apply the new configuration, RAID EzAssist writes configuration
information to the Mylex controller and the drives. This takes a few
moments, so a message is displayed (Figure 2-54).
Figure 2-54. Writing RAID Configuration. Please Wait...
☞ Wait for the configuration information to be written to the
controller and the drives.
When the process is complete, RAID EzAssist brings you back to the main
menu, or to select a controller if there are multiple controllers.
☞ To unassign other spare drives, repeat the procedure
described in this section.
When the main menu appears: