Technical information

How Do I Assign Additional Spare Drives?
2-48 RAID EzAssist User’s Manual
Figure 2-47. Designate Drive as Spare Confirmation
☞ To apply the configuration, use the arrow key to select Yes if
necessary, then press Enter.
OR
☞ To cancel the configuration change, use the arrow key to
select No if necessary, then press Enter.
When you apply the new configuration, RAID EzAssist writes configuration
information to the Mylex controller and the drives. This takes a few
moments, so a message is displayed (Figure 2-48).
Figure 2-48. Writing RAID Configuration. Please Wait...
☞ Wait for the configuration information to be written to the
controller and the drives.
When the process is complete, RAID EzAssist brings you back to the main
menu, or to select a controller if there are multiple controllers.
☞ To assign additional spare drives, repeat the procedure
described in this section.
When the main menu appears: