Technical information

Drive Configuration
Manual No. 775029 2-47
☛ Note
If you do not have any unconfigured drives available
on this controller, you will be unable to use the Assign
Spare Drive(s) option.
❑ Assign Spare Drives.
Spare drives for the array(s) you’ve set up are assigned in the Physical Drive
Selection screen (Figure 2-46).
Figure 2-46. Physical Drive Selection Screen
This screen uses the following navigation strategy:
• Arrow keys move among the defined physical devices.
• Enter selects the highlighted physical device.
☞ Use the arrow keys to select a physical drive with current
status “Unconfigured,” then press Enter.
❑ Apply the Configuration to the Controller.
To add the physical drive you selected to the registered configuration, the
configuration changes need to be applied to the controller. At this point in
the process, a confirmation screen is displayed (Figure 2-47).