Technical information

Drive Configuration
Manual No. 775029 2-41
☛ Note
If you have not previously defined at least one disk
array, you will be unable to use the Define Logical
Drive(s) option. Begin with the Configure a New Disk
Array option.
❑ Define Logical Drives.
Logical drives for the array(s) you set up previously are defined from the
Logical Drive Definition screen (Figure 2-23).
Figure 2-41. Logical Drive Definition Screen
This screen uses the following navigation strategy:
• Arrow keys move among the logical drive definition fields.
• For RAID Level, Write Cache, and Stripe Size(KB) definition fields,
the Spacebar brings up a list of valid options. Arrow keys move among
the options and Enter selects an option.
• For RAID Level, Write Cache, and Stripe Size(KB) definition fields,
the + and - keys cycle through the valid options. When the desired
option is visible, use the arrow key to move to another field.
• For Physical Capacity or Logical Capacity definition fields, type a
numeric decimal value representing the desired capacity in GB. You
may choose one or the other field to adjust.
• The Tab key shifts control to the buttons, or from the buttons back to
the logical drive definition fields.
• When buttons are in focus, arrow keys select a button and Enter