Technical information

How Do I Add Capacity to an Existing Disk Array?
2-38 RAID EzAssist User’s Manual
lets you:
• Delete the most recent logical drive you’ve added, OR
• Delete all the logical drives you’ve added in this logical drive definition
session.
☞ To delete the most recently-added logical drive, press Tab if
necessary to switch focus to the buttons, use the arrow key to
select Delete Last, then press Enter.
☞ To delete all logical drives that you added in this session,
press Tab if necessary to switch focus to the buttons, use the
arrow key to select Clear New, then press Enter.
☞ If you wish, define new logical drives, as described in “Define
Logical Drives” above.
❑ Apply the Configuration to the Controller.
In order for the expanded disk array with its logical drives to become a valid,
registered configuration, you must Apply the configuration to the controller.
Figure 2-36 shows what our new configuration might look like if we added
one logical drive to our expanded array.
Figure 2-36. Expanded Array Configuration With Logical Drives
☞ To apply the new expanded configuration, press Tab if
necessary to switch focus to the buttons, use the arrow key to
select Apply, then press Enter,