Technical information

How Do I Add Capacity to an Existing Disk Array?
2-34 RAID EzAssist User’s Manual
Figure 2-34. Define Logical Drives or Return to Add Capacity Set-Up
You should define your additional logical drives for the expanded array at
this time unless you may wish first to expand other existing disk arrays.
☞ To expand additional disk arrays, use the arrow key if
necessary to select No, then press Enter. Repeat the steps
described earlier in this section/
☞ To define logical drives at this time, use the arrow key if
necessary to select Yes, then press Enter.
❑ Define Logical Drives.
Logical drives for the array you want to expand are defined from the Logical
Drive Definition screen (Figure 2-35).
The disk array’s existing logical drives, if any, will be displayed.