Technical information

Drive Configuration
Manual No. 775029 2-33
field, then press Enter to accept the drive into the disk array.
☞ Repeat the step above for as many disk drives as you wish to
add to the existing disk array.
☞ When you’ve finished adding drives, press the Tab key to
switch focus to the buttons.
Figure 2-33 is a example of how your screen might look after the steps
above.
Figure 2-33. Sample Add Capacity Configuration
☞ If you’re not satisfied with your drive selections, use the
arrow key to select Clear, then Press Enter. Press Tab to return to
Unused Drives.
Your selections will be erased and you can try again as described above. The
drives that are configured in the existing disk array will remain visible in the
Disk Array field.
☞ To save the expanded array configuration you’ve set up,
press Enter with Save Array selected.
A Notice is displayed at this point as shown in Figure 2-34.