Technical information

Drive Configuration
Manual No. 775029 2-27
drive definition field line if capacity remains for additional logical drives
(Figure 2-26).
Figure 2-26. Logical Drive Has Been Added
☞ To define additional logical drives, use the arrow key if
necessary to return to the RAID Level definition field. Repeat the
steps described in “Define Logical Drives.”
As long as you haven’t applied the configuration to the controller, you can
delete the logical drives you’ve set up and define new ones. RAID EzAssist
lets you:
• Delete the most recent logical drive you’ve added, OR
• Delete all the logical drives you’ve added in this logical drive definition
session.
☞ To delete the most recently-added logical drive, press Tab if
necessary to switch focus to the buttons, use the arrow key to
select Delete Last, then press Enter.
☞ To delete all logical drives that you added in this session,
press Tab if necessary to switch focus to the buttons, use the
arrow key to select Clear New, then press Enter.
☞ If you wish, define new logical drives, as described in “Define
Logical Drives.”