Technical information

How Do I Do a Custom Configuration?
2-22 RAID EzAssist User’s Manual
Figure 2-21. Sample Disk Array Configuration
☞ If you’re not satisfied with your drive selections, use the
arrow key to select Clear, then Press Enter. Press Tab to return to
Unused Drives.
Your selections will be erased and you can try again as described above.
☞ To save the array you’ve set up, press Enter with Save Array
selected.
A Notice is displayed at this point as shown in Figure 2-22.
Figure 2-22. Define Logical Drives or Return to Disk Array Set-Up
“Do you want to build additional arrays at this time?”
If you want to set up additional arrays, it is convenient to do so at this time
before logical drives are defined.