Technical information

How Do I Do an Assisted Configuration?
2-18 RAID EzAssist User’s Manual
Figure 2-17. Writing RAID Configuration. Please Wait...
☞ Wait for the configuration information to be written to the
controller and the drives.
Next you’ll see a Configuration Status screen (Figure 2-18). Your assisted
configuration has been completed.
Figure 2-18. Configuration Complete - Reboot or Main Menu
☞ To exit RAID EzAssist, press Enter with the Reboot button
selected,
OR
☞ To continue using RAID EzAssist, use the arrow key to select
Main Menu, then press Enter.
When the main menu appears:
• Look in this chapter if you’ll be doing an additional configuration
activity.
• Refer to Chapter 3 if you’ll be doing controller configuration.
• Refer to Chapter 4 if you’ll be doing a monitoring or maintenance
activity, changing physical device SCSI properties (New Controllers
only), or adding drives (requiring a rescan for devices).
• Refer to Chapter 5 if you’ll be using any advanced options.
• To exit RAID EzAssist, see “How Do I Exit RAID EzAssist?” on page
2-67.