Technical information

How Do I Do an Assisted Configuration?
2-16 RAID EzAssist User’s Manual
logical drives, press Enter with Ok selected.
☞ If you want to reserve some capacity for future use:
☞ Press the up arrow key to select the capacity usage field.
☞ Type in a number representing the gigabytes (GB) to be
used in the current configuration. (This number must be
lower than the maximum value displayed.)
☞ Press the down arrow key to select Ok.
☞ Press Enter with Ok selected.
❑ Apply the Configuration to the Controller.
The RAID Configuration Summary screen is displayed (Figure 2-15).
Figure 2-15. RAID Configuration Summary Screen
If there are more than five drives in the array, you’ll see a small down-arrow
next to the disk drive display field.
☞ (Optional): If there is a down-arrow next to the disk drive
display field, press PgDn to see the additional disk drives in the