Technical information

How Do I Do an Automatic Configuration?
2-10 RAID EzAssist User’s Manual
selected,
OR
☞ To continue using RAID EzAssist, use the arrow key to select
Main Menu, then press Enter.
When the main menu appears:
• Look in this chapter if you’ll be doing an additional configuration
activity.
• Refer to Chapter 3 if you’ll be doing controller configuration.
• Refer to Chapter 4 if you’ll be doing a monitoring or maintenance
activity, changing physical device SCSI properties (New Controllers
only), or adding drives (requiring a rescan for devices).
• Refer to Chapter 5 if you’ll be using any advanced options.
• To exit RAID EzAssist, see “How Do I Exit RAID EzAssist?” on page
2-67.