Technical information

How Do I Start RAID EzAssist?
2-2 RAID EzAssist User’s Manual
displayed, including:
Press <Alt-M> for BIOS Options
Next you’ll see:
Press <Alt-R> for RAID Configuration options
☞ When you see the prompt, press <Alt-R>.
If you’ve pressed <Alt-R> within the allotted time, you’ll see:
RAID Configuration will start after system initialization completes
[X] system drives installed
If you were too late pressing <Alt-R>, simply reboot and start again.
☞ Wait for RAID EzAssist to start.
☛ Note
A DOS executable version of RAID EzAssist can be
found on the product CD-ROM. If you want to use the
DOS .EXE instead of the BIOS version, copy the
ezassist.exe file to a bootable DOS diskette.
Boot your system from the diskette; type ezassist
and press Enter at the DOS prompt.
❑ Get Started.
RAID EzAssist always starts by scanning for Mylex controllers and target
drives (Figure 2-1).
Figure 2-1. RAID EzAssist Scans for Controllers and Drives
☞ Allow scanning to complete.